- Principle of Planetary Cycloidal Pinwheel Reducer
It is a novel transmission device that uses the planetary transmission principle and uses cycloidal pin gear meshing. Detailed click (cycloid pin wheel reducer transmission principle)
二．Use of planetary cycloid pin gear reducer
Planetary cycloid pin gear reducer is widely used in petroleum, environmental protection, chemical, cement, transportation, textile, pharmaceutical, food, printing, lifting, mining, metallurgy, construction, power generation and other industries, as a driving or deceleration device, Planetary cycloid pin gear reducer is widely used in various industries and fields and is widely welcomed by users.
- Planetary cycloid pin gear reducer model:(Example: X Series Cycloidal Pinwheel Reducer)
- According to the transmission ratio, it can be divided into: level 1, level 2 and level 3.
There are twelve models in the first class: X0, X1, X2, X3, X4, X5, X6, X7, X8, X9, X10 and X11.
There are thirteen models in the two levels: X20, X32, X42, X53, X63, X64, X74, X84, X85, X95, X106 and X117.
There are seven models in the three levels: X420, X742, X842, X853, X953, X 1063 and X 1174.
- According to the structure type is divided into:
Horizontal, vertical, biaxial and direct type.
- Reduction ratio: (also called "speed ratio", referred to as "ratio") Details "Torque calculation formula of cycloid pin gear reducer"
The speed ratio of single-stage planetary cycloid pin gear reducer is: 9, 11, 17, 21, 23, 25, 29, 35, 43, 47, 59, 71, 87.
The two-stage planetary cycloid pin gear reducer speed ratios are: 99, 121, 187, 289, 319, 385, 473, 493, 595, 649, 731, 841, 1003, 1225, 1505, 1849, 2065, 2537, 3045 , 3481, 5133.
The three-stage planetary cycloid pin gear reducer speed ratio is: 5841-658530.
- F8000 series planetary cycloidal pinwheel reducer product introduction
The cycloidal pinwheel reducer is a kind of cycloidal pinwheel reducer which adopts the principle of planetary transmission, adopts cycloidal pin gear meshing, advanced design and novel structure. The reducer can be widely used in various speed reduction mechanisms, such as: lifting, transportation, metallurgy, mining, environmental protection, petrochemical, textile, printing and dyeing, food, light industry, pharmaceutical, rubber, packaging, plastics, beer, Road construction, grain and oil, etc. mechanical transmission.
- JXJ series planetary cycloidal pinwheel reducer product introduction
High transmission efficiency: Since the meshing part of the machine adopts rolling engagement, the average efficiency can reach more than 90%. Small size, weight axis: Since only the planetary transmission principle is adopted, the input shaft and the output shaft are on the same axis, and the motor is directly connected with the motor, the machine has compact structure, small size and light weight. specialty. The operation is reliable and stable: the multi-tooth meshing in the transmission process of the machine makes the operation stable and reliable, and the noise is low. Easy to disassemble and install, easy to repair: due to the reasonable design of the structure, it is easy to disassemble and easy to repair. The machine also has strong overload capability, impact resistance, small moment of inertia, and is suitable for frequent starting and reverse rotation.
- ADC series planetary cycloidal pinwheel reducer product introduction
The power transmission meshing parts are made of bearing steel and are quenched and ground, so the structure is more robust. Strong anti-overload capability—500% of the planetary cycloids use multi-tooth simultaneous transmission due to the use of cycloidal pin gears, thus avoiding the possibility of broken teeth. Therefore, the cycloid structure itself has high impact resistance overload capability that other structural reducers cannot withstand. The machine also has the characteristics of small inertia, so it is most suitable for heavy lifting and forward and reverse loads, and can be used in conjunction with dual-frequency reversible devices. The cycloidal rolling engagement type greatly reduces the noise level compared to the conventional sliding engagement type.
- 8000 Series Planetary Cycloidal Pinwheel Reducer Product Profile
Planetary cycloid reducer is a kind of planetary gear transmission principle. It adopts cycloidal pin wheel meshing, and has advanced design and novel structure. In most cases, this type of reducer has replaced two-stage and three-stage ordinary cylindrical gear reducers and cylindrical worm reducers in military, aerospace, metallurgy, mining, petroleum, chemical, shipbuilding, light industry, food, textile, Printing, dyeing, pharmaceutical, rubber, plastics, and lifting and transportation are increasingly used.
- Z series planetary cycloid reducer JB/T2982-1994 product introduction
The cycloidal pinwheel reducer (JB/T2982-1994) is based on the principle of planetary transmission. It adopts cycloidal pin wheel meshing. The tooth profile of the planetary gear is the inner isometric curve of the variable amplitude outer cycloid. The center wheel tooth profile is circular. The utility model has the advantages of large transmission ratio, high transmission efficiency, compact structure, small volume, light weight, less failure, long service life, reliable and stable operation, low noise, convenient disassembly and assembly, easy maintenance, strong overload capability, impact resistance and small moment of inertia. . Can be used in metallurgy, mining, petroleum, chemical, shipbuilding, light industry, food, textile, printing and dyeing, pharmaceutical, rubber, plastics, lifting, transportation and other industries.
- New 9000 Series Cycloidal Pinwheel Reducer Product Profile
9000 series cycloid reducer, the input shaft is mounted in the big end cover through a bearing, and the input shaft is driven by the eccentric sleeve and the bearing on the eccentric sleeve through the cycloidal wheel and the pin gear sleeve on the pin gear pin The transmission shaft is transmitted to the output shaft to realize the deceleration movement, wherein the pin sleeve on the output shaft is in contact with the wear ring mounted on the large end cover, and the pin sleeve is separated from the large end cover to reduce the large end cover. Wear of the bearing surface. The 9000 series reducer is optimized for design, adding anti-friction device to reduce wear, reduce temperature rise, improve product precision and mechanical efficiency, and prolong service life.
- Planetary cycloid pin gear reducer expands reading:
Cycloidal pinwheel reducer origin
Cycloidal pinwheel reducer installation, maintenance and lubricant replacement notes
Planetary cycloidal pinwheel reducer manufacturer